Instructions on how to Build a Modern Bed D-I-Y Style

Published: 04th June 2008
Views: N/A

Well with every the modern bottom discover there in the market, it's same it pushes you to do more. Give it an edge, like, why not build your own. So what are the things to consider when you want to build a modern bottom yourself? The design, it is probably the most important abstract to consider on the project. This is where you should spend a beatific care of time. There are a lot of things that go into the design process, including, but not limited to: the space your bottom goes into, your budget, your handyman skills, and green products or not. You get the point. This particular project shown above was for a beatific friend. The budget was around $300, the space was small, and I was fairly handy and had access to quite a few tools. It crapper get a little bit higher if you consider doing a meliorate design on it.

You have to undergo and consider that the actual bottom is digit separate parts, the top, and the base. We'll start with the base. Try to attain the skeleton discover of affordable 1/2" plywood. It yet got covered with the nice walnut as show in the picture above. The humble was made discover of 4 separate pieces that were latched together. Try to tap portability in case they ever touched and desired to break it down into diminutive parts. The main abstract to consider is to be flexible and undergo the basis of the parts that you are doing, so that the idea on it module be beatific in terms of re-modeling it in the future or once you try to move the furniture out, it'll be rather easy to fix it up.

If you look closely the crowning didn't get the mitered 45 honor corners the humble got. It was just a 90 honor but joint, which doesn't look quite as nice, but it makes swing the ended walnut on a lot easier. Then try to attain it discover of four assorted parts with the humble which was then latched together. Do this for the sake of portability in the future. The overall dimensions of the crowning are about 6" wider per side, and at the bottom to get the overhang I wanted. It sits flush at the crowning of the bottom to save space in the room. The measurements however are important so you have to be knowledgeable on it as well. The portability of the bottom should also be considered in this portion.

Next is probably the hardest part, using walnut ply cover everything that module be seen.

This means using mitered edges where every the plywood joints meet. Try to use a tablesaw with the blade at a 45 honor angle, but you could use a circular saw with a straight edge clamped to the plywood. Take your instance and think about everything three times before you cut. The spaces in the middle of the bottom try to span it with multiple 1x4 pine slats. To finish it use water supported minwax polyurethane. Put a coat on, smoothen with 600 grit smoothen papers, repeat x 3. On your last coat smoothen with 1200 grit sandpaper for the glassy finish. Then you're every done, Modern bottom of your own design is finished. Let it be known that making digit is not easy and sometimes expensive, but the thought of building it yourself gives you the satisfaction and pride that it is your own creation.

Jron Magcale

">Modern Furniture Miami

Report this article Ask About This Article

More to Explore